Advertisement
How-To

How to Enable TPM 2.0 & Secure Boot in BIOS HP Laptops

Advertisement

One of the main requirements to install Windows 11 on your laptop or PC is to enable Secure Boot and TPM 2.0. So, if you have an HP laptop and don’t know how to enable these 2 requirements then you’re in the right place. In this post, you’re going to learn how to enable TPM 2.0 and Secure Boot on HP BIOS.

The system requirements for Windows 11 include a new requirement that wasn’t included in previous versions of the operating system: a Trusted Platform Module (TPM). TPM 2.0, which was originally released in 2014, is explicitly required.

The TPM is either a chip integrated into the hardware of your computer or a form of firmware that your CPU supports, which is more typical for consumer PCs. TPMs are tamper-resistant, making it extremely impossible for anybody to steal any of the data or cryptographic keys they create.

This chip’s dependability and security are referred to as a “hardware root-of-trust.” In essence, the TPM is a safety feature in your system, similar to the fireproof lockbox in your home where you keep vital documents.

This allows security features like encrypting your storage devices or using logins such as fingerprints or face recognition to help safeguard your machine. This is only feasible because your computer has a secure location to store encryption keys or biometric data that would otherwise be unsafe to store.

How to Enable TPM 2.0 and Secure Boot on BIOS HP

In order to enable TPM 2.0 and Secure Boot on your HP laptop, you must go to BIOS settings.

Here’s how it’s done:

Enable TPM 2.0 in HP

TPM stands for Trusted Platform Module, and its purpose is to safeguard data required to authenticate the computer you’re using. TPMs may be found in a wide range of devices, but we’ll concentrate on PCs here. The TPM may also be used to keep platform integrity, enable disc encryption, store passwords and certificates, and so on.

TPM chips are important in terms of overall system security, which Microsoft believes it needs to enforce with Windows 11.

While Windows 11’s TPM requirement has brought the technology to the fore, it isn’t a particularly novel concept; TPM is supported by Windows 10 and Windows 7 and has been used for a number of purposes. Windows 10 even goes so far as to claim it’s a must, but the issue isn’t strictly enforced.

Step 1. Restart your HP laptop and then press the F10 button to go BIOS Setup.

Step 2. Go to the Security tab, Navigate to TPM State using the down arrow key, and press enter.

TPM State

Step 3. Select Enabled and then press enter.

Advertisements
Enabled

Step 4. Now, TPM is enabled on your HP laptops from BIOS settings.

TPM is enabled on your HP

How to Enable Secure Boot in BIOS HP Laptops

Secure Boot is a technique defined in the UEFI specification for protecting the integrity of firmware and applications executing on a machine. The UEFI BIOS and the software it finally runs create a trust relationship through Secure Boot (such as bootloaders, OSes, or UEFI drivers and utilities).

Only software or firmware signed with authorized keys is permitted to run after Secure Boot has been activated and configured. Software signed using banned keys, on the other hand, is not permitted to run. This protects a system from malicious assaults, rootkits, and illegal software upgrades that might occur before the OS is launched.

To validate the digital signature of every firmware and software before execution, the Secure Boot method uses public/private key pairs. Let’s start with some high-level history on digital signatures before diving into the intricacies of UEFI’s Secure Boot.

  • Restart your HP laptop and then press the F10 button to go BIOS Setup.
  • Go to Boot Options, select the Secure Boot options using the key, and press enter.
How to Enable TPM 2.0 & Secure Boot in BIOS HP Laptops with Ease
Secure Boot
  • Select Enabled and then press enter.
How to Enable TPM 2.0 & Secure Boot in BIOS HP Laptops with Ease
Enabled
  • Finally, Secure Boot is enabled.
How to Enable TPM 2.0 & Secure Boot in BIOS HP Laptops with Ease
Secure Boot is enabled
  • Press F10 and select Yes to save the changes.
How to Enable TPM 2.0 & Secure Boot in BIOS HP Laptops with Ease
Yes
How to Check If TPM 2.0 is Enabled or Not in HP Laptops?

Confirm TPM 2.0 with Device Manager

  1. Right-click on the Start menu button and then select Device Manager.
Device Manager
  1. Expand the Security devices option.
  2. Confirm the Trusted Platform Module 2.0 entry exists.
Confirm TPM 2.0 with Device Manager

Confirm TPM 2.0 with Run

  • Press Windows + R to open Run.
  • Type tpm.msc into it and press Enter to launch the tool.
  • Your PC has a TPM if you see information about it on the PC, such as a notice in the bottom right corner of the window notifying you which TPM specification version your chip supports.
Confirm TPM 2.0 with Run

If you see a “Compatible TPM cannot be found” message instead, your PC does not have a TPM.

So, these were the stops to enable or tune on TPM 2.0 and Secure Boot on HP laptop from the BIOS settings.

Read More:

How to Enable TPM 2.0 From BIOS on Dell Laptops

4 Methods to Find or Know HP Laptop Serial Number in Windows 10

How to Enable Virtualization in Windows 10 on HP Laptops

Advertisement

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button